GameFi.org Guides
#Stake GAFI to upgrade your rank
#1. Launchpad ranking system and Unstaking policy
Link to the following articles to better understand GameFi.org launchpad ranking system and unstaking policy:
#2. Stake GAFI
#2.1. How to access
To access this feature, please follow these steps:
- Go to https://gamefi.org/
- Choose “Staking” on the left sidebar
#2.2. General information
(1) Summary of your current rank
- Your stake: The current amount of GAFI you are staking in this section
- $GAFI left to next rank: The amount of GAFI that needs to be staked more to reach the next rank
- Total $GAFI staked: Total amount of GAFI that all users staked in this section
(2) Overview of the ranking system
- $GAFI Required: Minimum amount of GAFI staked to reach the corresponding rank
- Winner Selection: Allocation method (Lottery or Guarantee)
- Max Individual Allocation: Maximum Allocation of each user
- Withdrawal Delay: or the cooldown time, is the period between when users unstake GAFI on GameFi Staking and when they can claim the unstaked GAFI to their wallet.
(3) Stake tab: This is the part where you stake GAFI to upgrade your rank
(4) Unstake tab: This is the part where you unstake GAFI
(5) Legendary Raking tab: List of 12 users in Legend rank – stake the most GAFI
#2.3. How to Stake
2.3.1. Pre-Stake
Check the requirements before you proceed to stake GAFI
- Connect your wallet
- Switch to the BSC network
- $GAFI available to stake
- BNB available in wallet – used to pay gas fees
Once you have met the conditions, tick the “I fully understand and agree with the Ranking System and New Staking and Unstaking Policy” section, then click the “Next” button.
2.3.2. Enter Amount
Enter the amount of GAFI you want to stake, then click the “Next” button.
2.3.3. Approve
In this step, when clicking the “Approved” button, you will grant access to staking smart contract to accept your GAFI. You need to Approve once and only one time.
2.3.4. Confirmation
In this step, when clicking the “Confirm” button, you will deposit GAFI into the staking smart contract. After this step, your tokens will be successfully staked.
2.3.5. Completed
After successfully staking, you can check the transaction hash.
#2.4. Unstake
Tick all checkboxes in the Unstaking policy and Withdraw delay time sections if you agree with these policies, then click the “Next” button. See the full Unstaking policy here.
2.4.2. Enter Amount
Enter the amount of GAFI you want to unstake, then click the “Next” button
2.4.3. Confirmation
Click the “Confirm” button if you want to unstake.
After this step, your tokens will be successfully unstaked. You will be allowed to withdraw your GAFI after delay withdraw time.
2.4.4. Completed
After the unstake is successful, your unstake information will be updated at the Pending withdraw section on the right side.
- Note
#2.5. Restake - Withdraw
You can see the number of GAFI you are staking (1) and the number of GAFI you have unstaked along with the withdrawal time (2) on the right at the Stake tab and Unstake tab.
- Before withdrawing time, you can restake the amount of GAFI that you have unstake by clicking the “Restake” button.
- After withdraw time, the “Withdraw” button will enable. You can withdraw the GAFI that you have unstaked by clicking the “Withdraw” button.
#How to join IGOs
#1. How to access
To access this feature, please follow these steps:
- Go to https://gamefi.org/
- Choose “IGO” on the left sidebar
#2. Connect Wallet
#2.1. Connect the main wallet
-
Click the “Connect Wallet” button in the header to connect your wallet.
-
In the Connect Wallet popup window, choose a network and the corresponding wallet you use
#2.2. Add sub-wallets to My Profile
Select My Account in the drop list menu in the right corner of the screen
In the My Profile section, your wallets linked to GameFi.org are listed in the “Wallet Addresses” area.
- Main Wallet Address: This is your primary wallet address for staking, KYC, and applying for the pool whitelists.
- The sub-wallet addresses (Solana, Terra,…): The sub-wallet will be used when you apply for whitelists of IGO pools based on Solana networks. You will participate in the IGO pools by using your main wallet address, and your tokens will be sent to the Solana/Terra Address you connected.
Step 1: Click [Edit Profile] then [Sign]
Step 2: Enter your Solana/Terra wallet address
Step 3: Click [Save] then [Sign]. Once you confirmed, you have successfully added your sub-wallet addresses on the GameFi.org launchpad.
#3. Stake
You need to achieve one of GameFi ranks (Rookie, Elite, Pro, Legend) to be eligible to join the IGOs. To stake, please go to https://gamefi.org/staking in the left sidebar. Click here to view the detailed user guide on how to staking on GameFi.org.
#4. KYC
After staking successfully, you can apply whitelist for joining the IGOs.
- Go to the “Upcoming” area in Pool Dashboard, select the pool you want to join whitelist, and open its details.
- The system will ask you to KYC. Click the “Verify Now” button on the Requirements section. It will navigate you to Icetea Labs KYC on Blockpass.
Fill in all the necessary information to complete the KYC process.
- Your KYC’s status on GameFi will be changed to “Verified” once you pass the KYC process successfully.
- The email you use on Blockpass for KYC will be automatically reflected on GameFi.
#5. Apply Whitelist
The Whitelist popup is shown after clicking the “APPLY WHITELIST” button on the Requirements section.
The requirements to join the whitelist are different for each pool and are decided by the project team.
Before clicking the “APPLY WHITELIST” button on the popup, make sure that:
You have completed all tasks the project team required according to your rank.
You have entered your Twitter and Telegram username.
- Note
Please input your username on Twitter and Telegram like the following example:
- Your Twitter is https://twitter.com/A123456 -> Please input @A123456 in Your Twitter Account.
- Your Telegram is https://t.me/A123456 -> Please input @A123456 in Your Telegram Account.
-
The system will verify your information after you click the “APPLY WHITELIST” button.
- Note
-
Your whitelist application might be pending due to some unforeseen technical issues (Ex: overload check) that occurred during the verification of your social requirements.
-
We will check and verify your application later in a short time. You can click the “REVIEW SUBMISSION” button to check your social requirement status.
-
Once all the requirements are met, your whitelist application will be approved.
#6. Swap Tokens
#6.1. Check your Allocation
You can check your allocation when whitelist winners of the pool are announced.
- Select the pool for which you have applied whitelist successfully and open its detail.
- Note
When the list of winners is announced, on the pool detail:
- You can see your allocation in the message on the header or Swap tab.
- You can search your wallet address by using the first or last 14 digits on the Winner tab.
- Check the countdown on the Pool Timeline area to see when you can start swapping tokens.
- Be sure to check your wallet balance for the currency required by the pool and BNB (ETH/MATIC) for the gas fee as well before swapping.
- After you have done this step, you just need to wait until the pool is open.
#6.2. Approve
You need to Approve once (and only once) before you can start purchasing.
- Navigate to the Swap tab:
- Check your “Max Allocation” information.
- Input the amount you want to approve (or click Max to auto-fill with your max).
- The token will be automatically calculated based on the amount you input and the exchange rate.
- Confirm all the information and click the “Approve” button.
- Confirm the transaction in your wallet after clicking the “Approve” button.
- After confirming, you will see an option to view your transaction.
- Make sure to check the current balance in your wallet.
- Make sure you have ETH or BNB on your wallet for the Gas fee.
- Only the gas fee is deducted from your wallet. Your currency balance remains the same.
#6.3. Swap
You can swap tokens after approving successfully.
- In Step 2. Swap, enter the amount you want to purchase (or click Max to auto-fill with your max) and click the Swap button.
- Confirm on your wallet and wait until the transaction is mined. The Token Deposit Successful message will be displayed after your transaction is confirmed and processed successfully.
- You can check your purchased tokens on the Round Info Area and just only need to wait for the pool time to finish before being able to claim and withdraw them.
#7. Claim Tokens
Once the pool swap time is over, you will be able to claim your tokens.
- Open the pool details and navigate to the Claim tab:
- Have bought: Your amount spent / Your allocation
- Equivalent: The total amount of tokens you have purchased
- Claimed On GameFi: Tokens you have claimed on GameFi
- Vesting: The claim policy is decided by the project team. The milestones for claiming tokens are displayed according to the claim policy. You can refer to the example below.
- Claim Type: Depending on the project, you can claim tokens at GameFi.org, or the project will airdrop directly to your wallet, or the project will ask you to claim tokens on another page.
- Click the “Claim on GameFi.org” button to claim tokens that you can claim on GameFi.org. The button will be enabled when it reaches the token claim time.
#How to join INO
#1. How to access
To access this feature, please follow these steps:
- Go to https://gamefi.org/
- Choose “INO” on the left menu
#2. Connect Wallet
Refer to How to join IGOs – Connect wallet for details
#3. Apply Whitelist
Go to the “Upcoming” area in Pool Dashboard, select the pool you want to join whitelist, and open its details.
- Click “Apply Whitelist” and wait for the successful notification message.
- Order the number of boxes you would like to buy and click “Confirm”.
- Note
#4. Buy NFTs box
You need to Approve once (and only once) before you can start purchasing.
- Then, select the number of NFT boxes you want to possess by clicking on the Amount section.
- After successful purchase, you can check your quantity of purchased boxes in the Collection tab
#5. Claim your NFTs
After buying for a while (can be long or short depending on the project), you will access GameFi’s website to claim NFT.
- You can claim all (1) or claim each box (2) and get NFTs (depends on each project).
- Click “View your NFT” (3) which will lead you to the page to view the NFTs you just claimed.
#GameFi Marketplace
#1. How to buy NFT
Step 1: Go to https://gamefi.org/
- Step 2: Click the “Marketplace” on the left menu
- Step 3: Choose the NFT you want to buy
Depending on the setup of the collection, you may have 1 of these 2 options or both: Buy Now or Make Offer
#1.1. Buy Now
Step 1: On the NFT details page, click [Buy Now]
- Step 2: Check your NFT price and wallet balance then click [Buy Now]
- Step 3: Confirm the transaction in your wallet and wait until the transaction completes
#1.2. Make Offer
Step 1: On the NFT details page, click [Make Offer]
- Step 2: Fill in your offer price
- Step 3: Click [Make Offer]
#1.2. Make Offer
Step 1: On the NFT details page, click [Make Offer]
- Step 2: Fill in your offer price
- Step 3: Click [Make Offer]
- If the seller accepts your offer, you will receive the NFT directly. You can browse all the NFTs you own or list on Marketplace in Collection.
If the seller delists the NFT or accepts another offer, you can claim your money back following these steps:
- (1) go to the details page of that NFT
- (2) Click “Cancel”
#1.3. Adjust Offer
Step 1: On the NFT details page, click [Make Offer]
- Step 2: Fill in your offer price
- Step 3: Click [Confirm]
- Step 4: Confirm the transaction in your wallet and wait until the transaction completes
More specific:
- You have offered to buy NFT X at the price of 0.1 BNB.
- Scenario 1: You want to make a higher offer: buy NFT X at the price of 0.15 BNB. After transaction confirmation, you will be charged 0.05 BNB more from your wallet.
- Scenario 2: You want to make a lower offer: buy NFT X at the price of 0.05 BNB. After transaction confirmation, you will be refunded 0.05 BNB to your wallet.
#2. Features for NFT owners
#2.1. Sell NFT on Marketplace
Step 1: Access “Collection”
- Step 2: Choose 1 NFT in the Assets tab
- Step 3: Click [Fixed Price]
- Step 4: Choose Currency and fill in the price
- Step 5: Click [Submit]
- Step 6: Confirm the transaction in your wallet and wait until the transaction completes
#2.2. Delist NFT on Marketplace
If you are selling your NFT on Marketplace and you want to delist it, please follow these steps:
- Step 1: Access “Collection”
- Step 2: Choose the NFT that you want to delist on the On sale tab
- Step 3: Click [Delist]
- Step 4: Confirm your delist by clicking [Delist]
- Step 5: Confirm the transaction in your wallet and wait until the transaction completes
#2.3. Accept Purchase Offer
For example:
- You have listed NFT X at the price of 0.5 BNB
- B offer to purchase your NFT at 0.1 BNB
- C offer to purchase your NFT at 0.2 BNB
You can accept one of these two offers (Sellers tend to accept a higher offer, in this scenario C offer will be accepted)
- Step 1: Access “Collection”
- Step 2: Choose that NFT listed on the On sale tab
- Step 3: Go to the Offers tab
- Step 4: Find the chosen offer on the list and click [Accept]
- Step 5: Confirm the transaction in your wallet and wait until the transaction completes
#2.4. Transfer your NFT to others
You can only transfer your NFT to other people when it is not being listed on Marketplace.
To transfer your NFT to other people, please follow these steps:
- Step 1: Access “Collection”
- Step 2: Choose 1 NFT in the Assets tab
- Step 3: Click [Transfer]
- Step 4: Fill in the Receive Address and click [Transfer]
- Step 5: Confirm the transaction in your wallet and wait until the transaction completes
#FAQ
#1. Change RPC BSC network
Failure to perform the following operations on BSC network using MetaMask wallet: Approve – Swap – Claim
Recently, several users have got into trouble with wallet connection, which leads to the non-display of wallet balance, and issues once applying whitelist or staking.
To deal with those problems, we recommend users to change RPC URL to public node as the following steps:
For users using MetaMask wallet:
1️⃣ Choose MetaMask Extension
2️⃣ Go to setting page
3️⃣ Choose Networks tab
4️⃣ Choose Binance Smart Chain/BSC
5️⃣ Change RPC URL to https://bsc-dataseed.binance.org/
#2. Change RPC Polygon network
For users using MetaMask wallet:
1️⃣ Choose MetaMask Extension
2️⃣ Go to setting page
3️⃣ Choose Networks tab
4️⃣ Choose Polygon Mainnet
5️⃣ Change RPC URL to https://polygon-rpc.com/
Last updated